Integral Cement Water Proofing Compounds
To reduce permeability of concrete & mortar, to achieve Excellent Waterproofing performance.
Waterproof Cement Plastering Solution
Does Complete waterproof by improving moisture retention and bonding strength
Concrete Admixtures and Water reducing compounds
Remarkable improvement in the workability by controlled water cement ratio and achieves fully water-tight concrete.
Super Plasticizers and Water Reducing Agents
Produce very high quality concrete of reduced permeability, Increases compressive strength of the reinforcement.
Hyper plasticizers and water reducers
Improves workability, flow ability of concrete without increase in water, high early strength of concrete with improved hardness, reduces line friction.
Reinforcement protective super plasticizer
Highly recommended for concrete exposed to corrosive atmosphere or aggressive atmospheric conditions.
A dependable and proven set retardent, Reduces the tendency of fast set, allows more transit time for ready mixed concrete.
Retarding Super Plasticizer
Super plasticizer and set retarding plasticizer, Retards initial setting time and extends workability.
Air entraining agents
Remarkable improvement in the workability, cohesion, reduces honey combing and bleeding.
Set Accelerators, waterproofing compounds
Quick setting and rapid hardening and consequently improving durability and resistance against heavy loads.
Non Shrink,Fee flow,High Strength, Epoxy and Anchor Grouts
Highly compensates for shrinkage. Increases flow ability and produces high ultimate strength.
Rust removers, anti corrosive Rust conversion preventive system
Used for removal of rust from metals like structural steel, refinery, railways, metal fabrication etc.
SBR Epoxy Bonding agents and Block adhesives
It has excellent adhesive strength to concrete/steel. Protects the reinforcement from any corrosion.
Waterproofing and protective coating systems
Excellent elastomeric properties allows breathability of coating and resists cracks formation.
Crystaline admixtures and coatings
Excellent waterproofing treatment for the positive and negative pressures of leakages, seepages and dampness.
Two component cementitious elastomeric coating systems
Excellent crack resistant, hard abrasion resistant waterproofing systems for existing and new structures.
Cementitious - Acrylic latex - polyurethane sealants
Develops watertight, paintable, super strong, unbreakable putty It stops the leakages, seepages, completely.
Nanotechnology transparent water repellent
Protects the concrete/mortar surfaces from the attack of salts and acids, it prevents growth of fungus, algie and micro organisms.
Eliminates the use of water. Minimises shrinkage cracks on substrate and better curing of concrete at an earliest.
Very fast setting hydraulic type cement compound for concrete repairs, stops flowing water in seconds, seals cracks and any other defects in concrete.
Polymer admixture for structural concrete repairs
Mortar grade specifically designed for increasing the compressive, shear and bond strengths of mortar mixes.
It ensure high early strength and long term durability of the concrete with low permeability of water, facilitate early high strength.
Suitable for reinstatement of defective concrete surfaces, damp and dry surfaces, Rapid hardening at low temperatures.
High performance repairs of pavements, runways, which requires high performance bonding strength and highly resistance to water.
Aesthetic appeal and protection against water and carbondioxide penetration, waterborne chemistry for uncomplicated handling and clean up.
It is a economical concrete floor hardener recommended for both interior and exterior use.
Mould releasing agent
Concrete form release agent. Provides a defect free clear surface. Available solvent based MRA and water based MRA also.
salt protector and anti efflorescence coating
Excellent alkali & efflorescence resistance. Physical barrier to water transport. Chemical barrier to salt migration.
Tile fixing adhesives and joint fillers
Excellent adhesion, improved workability waterproof and also heat resistant tile fixing adhesive
Does not shrink or crack, strong bonding to joining surface, soap and acid, water resistant. Non-toxic excellent waterproofing.
Quickly removes the cement dust, concrete and mortar remainder and stain. Chances of rusting are decreased.
Light weight and thermal insulating concrete can be made at various densities of concretes 450 to 1250 Kg per cum. with variable dosage.
Epoxy flooring / wall coatings
Ideal to industrial floors where a hardwearing, hygienic, dust free environment is important. Useful for hospital clean rooms, electronic assembly plants.
Bitumen / Mastic pads / Membrane products
Recommended as a primer coat before laying the felts, membranes, bitumen coatings / sealants.
Road making paints
Fast drying highly durable 100% acrylic retro-reflective water borne paints. These represent a generational shift in markings.
Ready mix cement plaster / concrete
Recommended for inner and outer walls on brick, block. stone walls as well as concrete surfaces.
Flooring / Road repair products
Excellent High bonding and load bearing strength for old surface structural rehabilitation works, abrasion resistant flooring